BepiColombo is a joint mission by the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA). The mission, consisting of two orbiters that travel to Mercury stacked on top of each other, launched into orbit around the sun in 2018. Since then, ground controllers have been adjusting the spacecraft’s trajectory through a series of nine flyby maneuvers (one at Earth, two at Venus and six at Mercury itself), to gradually slow BepiColombo down so that it can enter orbit around the solar system‘s innermost planet in 2025.The June 23 flyby was BepiColombo’s second at Mercury, following the probe’s first encounter with the planet in October 2021. The probe made its closest approach to Mercury’s surface at 5:44 a.m. EDT (0944 GMT), when it passed only 125 miles (200 kilometers) from Mercury’s crater-riddled surface, closer than the two orbiters will operate once the mission begins in earnest.
The probe was taking images of the scorched planet during the flyby with its low-resolution monitoring cameras that are mounted on the spacecraft’s transfer module.
The two orbiters together carry 16 scientific instruments, but only about 60% of those were operational during the 48 hours around the closest approach, ESA’s BepiColombo project scientist Johannes Benkhoff told Space.com in an email. The rest, including high-resolution cameras, cannot be operated in the cruise configuration, as they are hidden either by the spacecraft’s transfer module or its sunshield.
Benkhoff said the spacecraft’s magnetometers and particle detectors were switched on during the flyby and will likely generate valuable scientific data about the solar wind in Mercury’s vicinity.
During this flyby, BepiColombo approached Mercury from the night side, Benkhoff noted, which meant that imaging could only start 4 minutes after the closest approach, when the planet was sufficiently illuminated. By then, the probe was about 500 miles (800 km) away from Mercury’s surface.
The images, which ESA plans to release within about a day, are expected to reveal craters and tectonic faults on Mercury’s sunburnt surface.
“Even during fleeting flybys, these science ‘grabs’ are extremely valuable,” Benkhoff said in an ESA statement (opens in new tab). “We get to fly our world-class science laboratory through diverse and unexplored parts of Mercury’s environment that we won’t have access to once in orbit, while also getting a head start on preparations to make sure we will transition into the main science mission as quickly and smoothly as possible.”
BepiColombo is only the second probe in history built to orbit Mercury, after NASA’s Messenger mission, which studied the tiny rocky planet between 2011 and 2015. (Although in the 1970s, NASA’s Mariner 10 made three flybys at Mercury while in orbit around the sun and took the first-ever images of the planet).
Mercury is a strange world where temperatures reach up to 800 degrees Fahrenheit (420 degrees Celsius) in the sun-exposed parts, but where, at the same time, scientists believe water ice lingers in permanently shadowed craters around the poles.
Mercury, while geologically dead at first glance, also shows hints of some form of tectonic activity, and sports a surprising magnetic field that scientists so far cannot fully explain. Many of these mysteries were uncovered by Messenger, and scientists hope that BepiColombo will provide the missing answers.
BepiColombo still has four flybys to go before finally settling into orbit around Mercury. The next flyby will happen about one year from now. In the meantime, next month, BepiColombo will make the closest approach to the sun of its whole mission.
Reaching Mercury is notoriously difficult, more difficult than reaching the distant giant planets Jupiter and Saturn. The reason for that is that the sun’s gravity constantly accelerates any Mercury-bound probe, which needs to shed energy and speed — hence the long and winding journey of planetary flybys.